Eminent EM8622 Bedienungsanleitung PDF herunterladen (Seite 7)

ENGLISH

3.2.2 Using RFID Tag to disarm

If direct disarm by RFID tag is disabled (this is the default power saving mode when

using batteries), user needs to press [*] to wake up the control panel and then put

RFID tag close to the reader to disarm the alarm system..

When the power saving function is disabled, user can put the RFID tag directly close to

the control panel to disarm the alarm system.

3.2.3 Home Mode

Input user code or admin code and press [Home Mode] key, the LED indicator flashes

once and the control panel beeps once and sends Home Mode command to the alarm

system.

When the alarm panel receives the signal, the siren will beep once and the Home

Mode indicator will light, the alarm system enters Home Mode state.

All the sensors in other zones are armed to prevent the intruder except that the motion

detector in Home Mode Zone is disarmed, so that people can move freely at home.

Note : Check manual of the alarm system for installing sensors in home mode.

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Keine Kommentare

Eminent EM8622 Bedienungsanleitung Seite 7